Dynamic RS4 설치 지침 및 소비자 정보 - 페이지 8
{카테고리_이름} Dynamic RS4에 대한 설치 지침 및 소비자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamic RS4 9 페이지. Whole house iaq system
페이지 인쇄h. Plug the lamp into the lamp connector.
i. Replace and secure the cover using the two retaining nuts.
j. Plug power cord back into outlet, or restore power to unit.
2) Replacing the UV Lamp:
a. Replacement lamps are available from your heating and air conditioning
contractor and should be replaced after every 18000 hours (2 years) of operation.
Follow the same steps as above, excluding step f.
Section VIII. Replacement Parts
1) Maintenance is limited to periodic replacement of the air cleaner media pads, typically every
3 to 4 months.
Activated carbon inserts and Series2 UVC lamps should be replaced every
18,000 hours, or every two (2) years. Use only GENUINE replacement parts.
2) Replacement parts can be ordered from your heating and air conditioning contractor. Have
the model number or unit size available when calling.
Filter Box Parts
Item Description
1
Door Assy
2
Door Handle
3
Door Clip
4
Front Frame Assy
5
Door Lock Nut
6
Block off plate
7
Bottom Angle
8
Top Angle
9
Back Cover
10 Flange Assembly
Air Cleaner / Carbon Tray
Item Description
1
Media Pad
2
Power Head
3
Power Cord
4
Insulator Button
5
Latch
6
Indicator Light
7
Input Jack
8
Hinge
9
Frame
10 Corner
11 Screen
12 Spline
13 Warning Label
14 Brand Label
15 Patent Label
16 Size Label
17 Carbon Tray Latch
18 Carbon Inserts (4)
19 Track
FOR TECHNICAL SUPPORT CALL (800) 578-7873
Specifications are subject to change without notice
©2013 Environmental Dynamics Group
8
GEN-212 (7/14)