Automationdirect.com Productivity 2000 P2-04B 매뉴얼 - 페이지 6

{카테고리_이름} Automationdirect.com Productivity 2000 P2-04B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automationdirect.com Productivity 2000 P2-04B 8 페이지. Base

DIN Rail Installation

Using Mounting Rails

The Productivity2000 bases can be secured to the cabinet using

mounting rails. You should use rails that conform to DIN EN

standard 50 022. Refer to our catalog for a complete line of DIN

rail, DINnectors and DIN rail mounted apparatus. These rails are

approximately 35mm high, with a depth of 7.5mm. If you mount the

base on a rail, you should also consider using end brackets on each

end of the rail. The end brackets help keep the base from sliding

horizontally along the rail. This helps minimize the possibility of

accidentally pulling the wiring loose.

If you examine the bottom of the base, you'll notice retaining

clips. To secure the base to a DIN rail, place the base onto the rail

and gently push up on the retaining clips. The clips lock the base

onto the rail.

To remove the base, pull down on the retaining clips, slightly

lift up the base, and pull it away from the rail.

End Bracket (Part No. DN-EB35)

DIN Rail (Part No. DN-R35S1)

www.productivity2000.com

Rotate base

into position.

DIN Rail

Dimensions

7.5 mm

35 mm

Hook base

onto DIN rail at

top of mount-

ing slot.

Retaining Clips

Tech Support 770-844-4200

Gently push up

retaining clips.