Automationdirect.com Productivity 2000 P2-16NA 매뉴얼 - 페이지 2
{카테고리_이름} Automationdirect.com Productivity 2000 P2-16NA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automationdirect.com Productivity 2000 P2-16NA 4 페이지. Ac input
페이지 인쇄
Module Installation
WARNING:
Do not apply field power until
the following steps are completed. See
hot-swapping procedure for
exceptions.
Step One:
Align module
catch with base slot and
rotate module into
connector.
Step Two:
Pull top locking
tab toward module face. Click
indicates lock is
engaged.
Step Three:
Attach field wiring using the removable
terminal block or ZIPLink wiring
system.
2
www.productivity2000.com
2
rotate
to seated
position
1
Align
with slot
Locked
Unlocked
QR Code
Use any QR Code reader application to
display the module's product insert.
Caution: If possible, remove field power prior to
proceeding. If not, then EXTREME care MUST be taken
to prevent damage to the module, or even personal injury
due to a short circuit from the live terminal block.
Important Hot-Swap Information
The Productivity2000 supports hot-swap! Individual
modules can be taken offline, removed, and replaced
while the rest of the system continues controlling your
process. Before attempting to use the hot-swap feature,
be sure to read the hot-swap topic in the programming
software's help file or our online documentation at
AutomationDirect.com for details on how to plan your
installation for use of this powerful feature.
Tech Support 770-844-4200