Gait up GAIT UP GO 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Gait up GAIT UP GO에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gait up GAIT UP GO 12 페이지. Medical device indicated for mobility and physical condition parameter assessment

페이지 인쇄

Get started with GaitUp GO – Normal use (2/ 2)

The Physilog6 will connect automatically after

selecting the test if it has previously been

linked to the mobile application.

Follow carefully the instructions that appear

on the mobile application screen. The location

of the sensor device vary depending on the

test to be performed. Follow the instructions

shown on the screen and tap "Ready"

Stop the test: some tests stop automatically

after performing the movement. If the test is

not listed below, tap "End" to stop the test.

NOTE: If the test did not stop automatically,

tap "End".

Test type

Monopodal balance comparison

One leg balance

Balance on two legs

Semi-tandem balance

Romberg test

Sit to stand transfer

Vertical jump 1 leg

Vertical jump 2 legs

2 minutes walking test

Timed Up and Go

Timed Up and Go in dual task

trademarks of Mindmaze Holding SA.

Stop automatically after:

30 seconds (x 2)

30 seconds

30 seconds (x 2)

5 sit to stand detected

1 jump detected (x 2)

3 jumps detected

2 minutes

1 Timed Up and Go detected

Start the test

instructions on the mobile application.

At the end of the test, save or discard the

result of the previous test.

A confirmation request appears to use

one credit to generate the report

NOTE: If the "Direct access to the

results" is not activated the results will

be automatically saved in the phone and

the report can be generated later.

by following the