Gait up PhysiGait Live 사용자 매뉴얼 및 결과 매개변수 - 페이지 16

{카테고리_이름} Gait up PhysiGait Live에 대한 사용자 매뉴얼 및 결과 매개변수을 온라인으로 검색하거나 PDF를 다운로드하세요. Gait up PhysiGait Live 19 페이지.

3D Path Length [% stride length] is the length of the real path of the foot

during one cycle in 3D space, including both stride length and swing width.

6.4

Turning Analysis

Turning Angle [deg] is the angle between two consecutive foot-flat phases

of the same foot on a horizontal plane. When this parameter is above 20°

for one cycle, it is considered as a turn. It can be discarded to evaluate only

straight walking.

6.5

Note that clearance parameters are accurate when shoe size (not foot size) is entered in

the menu of the software prior to performing data analysis. Clearance calculation is based

on a biomechanical model and may not be estimated in case of severe gait pattern

alterations (shuffling etc...), See Mariani et al., 2012 and Dadashi et al., 2014.

A: Max. Heel Clearance [m] is the maximal height above the ground reached by the heel

during each cycle.

B: Max. Toe Clearance 1 [m] is the maximal height above the ground reached by the toes

just after heel max clearance.

C: Min. Toe Clearance [m] is the minimum height of the toes during swing phase.

D: Max. Toe Clearance 2 [m] is the maximal height above the ground reached by the toes

just before heel strike.

PhysiGait user manual v1.3.1 Date: 29.04.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760