Gait up PhysiGait Live 사용자 매뉴얼 및 결과 매개변수 - 페이지 6

{카테고리_이름} Gait up PhysiGait Live에 대한 사용자 매뉴얼 및 결과 매개변수을 온라인으로 검색하거나 PDF를 다운로드하세요. Gait up PhysiGait Live 19 페이지.

There is a "Comment" tab where you can write some comments which will be displayed on

the gait report. To enter some text, click on the line, when you are finished no confirmation

is needed, the text is immediately saved. To exit the keyboard, press the system "Back"

button of the tablet.

3.4

Start the recording

To start the sensors, click on the "Start" button inside the application. The Physilog® LED

will become green for a short moment and then start to blink green, where each blink is two

short green flashes.

The best practice is to start the sensors when they are already attached to the foot just

before starting the gait test. The recording will start shortly after sending the start signal,

during a short synchronisation period the app ensures that sensors receive synchronisation

signals and when the countdown (3,2,1, Go) has arrived at "Go" you can instruct the subject

to start to walk according to your protocol. The displayed stopwatch will start at "Go" and

stop when you press "Stop".

3.5

Gait Up's PhysiGait Live system can be used to measure various walking tests, the system

is designed for logged gait tests of various length and protocol such as 20m gait test, 6min

walk test or a figure-of-eight test. When measuring several different protocols or conditions

it is recommended to do a measurement for each trial, that is: start and stop the recording

for each test.

The subject should not go further away than 15m from the tablet, otherwise the connection

between the sensor and app may get lost and the file transfer is interrupted. The tablet must

have internet connection to be able to upload the files to the server at the end of the

measurement.

PhysiGait user manual v1.3.1 Date: 29.04.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760