Automationdirect.com Productivity 2000 P2-08TD1S 매뉴얼 - 페이지 4
{카테고리_이름} Automationdirect.com Productivity 2000 P2-08TD1S에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automationdirect.com Productivity 2000 P2-08TD1S 4 페이지. Sinking dc output
페이지 인쇄
WARNING:
To minimize the risk of potential safety problems, you
should follow all applicable local and national codes that regulate
the installation and operation of your equipment. These codes
vary from area to area and it is your responsibility to determine
which codes should be followed, and to verify that the equipment,
installation, and operation are in compliance with the latest revision
of these codes.
Equipment damage or serious injury to personnel can result
from the failure to follow all applicable codes and standards. We
do not guarantee the products described in this publication are
suitable for your particular application, nor do we assume any
responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or
operation of this equipment, or if you need additional information,
please call Technical Support at 770-844-4200.
This publication is based on information that was available at
the time it was printed. At AutomationDirect.com® we constantly
strive to improve our products and services, so we reserve the right
to make changes to the products and/or publications at any time
without notice and without any obligation. This publication may also
discuss features that may not be available in certain revisions of
the product.
Removable Terminal Block Specifications
Part Number
P2-RTB
Number of
18 Screw Terminals
Positions
30–16 AWG (0.051–1.31 mm²)
Solid / Stranded Conductor
Wire Range
3/64 in. (1.2 mm) Insulation Maximum
1/4 in. (6–7 mm) Strip Length
Conductors
"USE COPPER CONDUCTORS, 75°C" or Equivalent.
Screw Driver
Width
Screw Size
Screw Torque
2.5 lb∙in (0.28 N∙m)
4
www.productivity2000.com
P2-RTB-1
18 Spring Clamp Terminals
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in. (1.2 mm) Insulation Maximum
19/64 in. (7–8 mm) Strip Length
1/8 inch (3.8 mm) Maximum
M2
N/A
N/A
General Specifications
Operating Temperature
Storage Temperature
Humidity
Environmental Air
Vibration
Shock
Field to Logic Side Isolation
Insulation Resistance
Heat Dissipation
Enclosure Type
Module Keying to Backplane
Module Location
Field Wiring
EU Directive
Connector Type (sold separately) 18 Position Removable Terminal Block
Weight
Agency Approvals
*Meets EMC and Safety requirements. See the D.O.C. for details.
Document Name
P2-08TD1S-DS
Copyright 2016, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
Tech Support 770-844-4200
0° to 60°C (32° to 140°F)
-20° to 70°C (-4° to 158°F)
5 to 95% (non-condensing)
No corrosive gases permitted
IEC60068-2-6 (Test Fc)
IEC60068-2-27 (Test Ea)
1800VAC applied for 1 second
>10MΩ @ 500 VDC
1800mW
Open Equipment
Electronic
Any I/O slot in a Productivity2000 System.
Use ZIPLink Wiring System or removable terminal
block (not included). See "Wiring Options" on
page 2.
See the "EU Directive" topic in the Productivity
Suite Help File. Information can also be obtained
at: www.productivity2000.com
98g (3.5 oz)
UL61010-2-201 file E139594, Canada & USA
CE (EMC: EN61131-2*, Safety EN61010-2-201)
Edition/Revision
Date
1st Ed. Rev. A
10/17/2016