Gait up Physilog 6S 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Gait up Physilog 6S에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gait up Physilog 6S 6 페이지.
Gait up Physilog 6S에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지)
페이지 인쇄Get and Analyze your data
HOW TO DO A RECORDING WITH PHYSILOG®6S
1
Press the main button for 3 seconds to start a measure.
Green shining indicates that the sensor is correctly started.
2
The sensor is recording.
Press the main button for 3 seconds until the orange light to
3
stop the measure. Your file is saved in the Physilog®6S internal
memory.
HOW TO EXTRACT THE DATA WITH PHYSILOG®6S
Connect your sensor to a PC with the USB - C cable.
1
Sensor is recognized as a USB device.
Copy-paste your file(s) on the computer. Your file(s) is saved
2
in the folder at the date of measurement or in the "NO_DATE"
folder if the time is not correctly set.
To visualize the raw data, download the Matlab Toolkit on the
3
GaitUp website > Support > Documentation.
Then drag and drop your files in the Research Toolkit software
4
to check your data.
© 2021 Mindmaze SA & Gait Up SA. All Rights Reserved. MindMaze, Gait Up, the Mindmaze LOGO, the Gait Up LOGO and Physilog are trademarks or registered trademarks of
Mindmaze Holding SA.