HIDRIA 0310-4-0135 사용자 설명서 - 페이지 4

{카테고리_이름} HIDRIA 0310-4-0135에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIDRIA 0310-4-0135 8 페이지.

OPERATING CONDITIONS

The fan is rated and designed for S1 (IEC 60034-1) continuous operation.

Extreme ON-OFF switching operating must be avoided, because it has negative influence on life expectancy and power consumption.

Cycling operating mode should only with cycling ON/OFF via control signal (0/10V analog input or PWM input).

Do not cycling the power supply for cycling operating mode – use control signal ! High 'In-rush current' can occur during cycling power supply!

Permissible ambient temperature is stated to the specified operating points. If actual load deviates from specified operating point, motor

temperature-rise should be checked.

Figures on the motor name-plate refer to nominal values according to EN 60335 if not otherwise specified and inscribed on the nameplate (EN

60335, 'free air', 'max.load', 'max.eff.', cust. unit / cust. spec., UL, IEC 60034-1)

Continuous sound pressure level may exceed 70dBA (depends of fan model).

If an already installed fan is switched OFF for a long period in a humid atmosphere, it should be switched ON for minimum of two hours every

month to remove any moisture that may have condensed inside the motor.

Protection (motor & electronics): IP54 according to EN60529 when it is installed in the customer's application. At least IP10 level of protection

must be provided with application enclousure.

Power consumption in stand-by mode: les than 1.0W acc. to EN 50561.

NOMINAL DATA - defined according to ' EN60335 '

Phase : 1~

Voltage : 230 V

Frequency : 50-60 Hz

Input power: 240 W

Nominal current : 1,68 A

Rotational speed : 950 RPM

Max. ambient temperature : 60 °C

Degree of protection provided by enclosures : IP54

Insulation class : 130

Min. ambient temperature : -25 °C

Max. pressure : 90 Pa

ErP DATA

Overall Efficiency , Effes : 50,8 %

Installation category : A

Efficiency category : static

Efficiency grade , N : 60,7

Variable speed drive : INTEGRATED

Power Input , Pelec: 276 W

Airflow volume , qV: 5304 m³/h

Pressure Increase, ps: 86 Pa

Rotational Speed, n : 960 RPM

Specific ratio : 1,001

Airflow volume max. , qV: 7804 m³/h

Pressure Increase max., ps: 195 Pa

USER'S GUIDE R10 AXIAL FAN , Code: 0000, Iss: 3.02.2020

An example of a label and explanation of the content:

1. Fan type and code

2. Trade mark and manufacturer address

3. Nominal values (Voltage, frequency, Electric Power, Current...)

4. Certification marks

5. Date of production (week of the year/year)

6. QR code which includes code number, production date, serial number and

link to website.

7. Data acc. to EU regulation 327/2011 (ErP)

8. NOTE INDICATE TO WHICH STANDARD/RULES CORESPOND DATA ON THE

NAMEPLATE:

- EN 60335-1 : Name-plate data are made according to standard EN 60335-

1, Household and similar electrical appliances – Safety – Part 1, Articles

10.1 and 10.2:

If an appliance is marked with rated power input, the power input at

normal operating temperature shall not deviate from the rated power

input by more than: + 20% if Pn<300W or +15% (or 60W whichever is the

greater) if Pn>300W.

If an appliance is marked with rated current, the current at normal

operating temperature shall not deviate from the rated current by more

than: +20% if In<1.5A or +15% (or 0,30A whichever is the greater) if

In>1.5A.

- FREE AIR : Data on the nameplate established at a point 0Pa static

pressure.

- MAX LOAD : Data on the nameplate established at a point of maximal

static pressure regarding max. ambient

- MAX. EFF. : Data on the nameplate established at a point of maximal

static efficiency.

- CUST. UNIT / CUST. SPEC. : Data on the nameplate specified according to

customer specifications or at working point in customer's unit .

- UL - Data on the nameplate defined according to specifications in UL

standards.

- IEC 60034-1 - Data on the nameplate established at a point of nominal

load according to standard for Rotational electrical machines.

temperature

4 / 8