Gait up Physilog 5 사용자 설명서 - 페이지 11

{카테고리_이름} Gait up Physilog 5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gait up Physilog 5 17 페이지.
Gait up Physilog 5에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 사용자 설명서 (17 페이지)

페이지 인쇄

iOS



Install the "nRF Toolbox" on the iOS device



Download the latest firmware version from the email to the iOS device



Add the downloaded firmware to nRF Toolbox by connecting the iOS

device to the computer:



Open iTunes and select your phone



Select the "Apps" tab on the left and scroll down



Under "File Sharing" select the nRF Toolbox app and add the Firmware

file to the Documents list



Click on "Done" and disconnect phone from computer



Open the nRF Connect app on the iOS device and enable Buetooth



Open DFU option of the app



Click on "Select File" and go to the tab "user files" where you find the firmware added to the

app earlier



Shortly push the main button of the Physilog®5 to enter detection mode



Click on "Select device" button and look for surrounding Physilog



Select connect of one Physilog®5 sensors in the list



Plug the selected Physilog to a power source to be sure to have enough battery to perform the

update



Click on "Upload" and wait until the percentage has arrived at 100%, this may take some minutes



For firmware versions before v1.2.2 you need to do a reset of the Physilog® (hold the main

button until the LED shines orange, blinks red and then stops)



Plug the Physilog® to the computer and update the date and time (see above)

Physilog5 user manual v1.2.6 Date: 19.06.2018

EPFL Innovation Park, Bat C. CH-1015 Lausanne

TVA CHE-145.136.760

Gait Up SA