Gait up Gait Up 사용자 설명서 - 페이지 4

{카테고리_이름} Gait up Gait Up에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gait up Gait Up 17 페이지.

Gait Up SA

EPFL Innovation Park, Bat C. CH-1015 Lausanne

www.gaitup.com

TVA CHE-145.136.760

1. GaitUp Lab package content

Physilog

5 are charged via micro USB. Connect the USB cable delivered with the sensors.

Connect the other part to a computer or sector with an adaptor (voltage specification: 5V,

5 must be turned off when charging. Don't charge the Physilog

100 mA). Physilog

5 if the

temperature is not between 0 ° and 45 °C.

Low battery level is indicated by orange blinking during measurement or by 3 rapid red blinks

when you want to start a new measurement. If the Physilog

5 is completely discharged,

charge at least 30 minutes before using. Battery level estimation is available when you pair

the sensor to the GaitUp application (available on Apple Store and Google Play Store).

NOTE: Charging problem is indicated by a continuous red light and it could damage

the sensor. In this case try to charge your sensor on another charging source.

By default, sensors are configured for running analysis with the GaitUp Lab. If you encounter

any problem during the analysis you can check the sensor configuration with the Research

Toolkit (Windows version/Mac version, User guide) in the "Configuration" part. Select your

sensors> "Load Config"> Change the configuration> "Send Config". For walking analysis,

the same sensor configuration as for running can be used. But if you only use walking

analysis, it is possible to set the sensor configuration to a lower frequency to reduce the size

of the raw data files (see table below) using the Research Toolkit.

User guide GaitUp Lab - v1.0.0 Date: 04.05.2020