Dynamic CCTV DVR-8 사용자 설명서 - 페이지 5
{카테고리_이름} Dynamic CCTV DVR-8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamic CCTV DVR-8 18 페이지. 8 channel digital video multiplex recorder
페이지 인쇄8 channel stand-alone DVMR
ALL ABOUT IMAGE RECOGNITION & PROCESSING
ALL ABOUT IMAGE RECOGNITION & PROCESSING
4-4. Arrangement RS-232C and RS-485 pin
Pin No.
Definition
1
NC
2
RxD
C o m m
3
TxD
1
4
SD-
(RS 485)
6
5
GND
RS-232C
6
SD+
(RS 485)
7
NC
8
NC
9
NC
DVMR unit
D-SUB 9 cable (twisted RS-232C cable)
# 2
RxD
# 3
TxD
# 5
GND
Connection to PC using RS-232C cable
29
4. Configuration
P o r t
5
9
Other device (PC)
RxD
# 2
TxD
# 3
GND
# 5
8 channel stand-alone DVMR
ALL ABOUT IMAGE RECOGNITION & PROCESSING
Before installing stand alone DVMR, be sure to thoroughly review and follow the instructions in this
User's Manual. Pay particular attention to the parts those are marked NOTICE.
Also, when connecting with external application, first turn the power OFF and follow
THE instruction in manual for appropriate installation.
1. This document is intended for both the administrator and users of stand alone DVMR.
2. This manual contains information for configuring, managing and using stand alone DVMR properly.
3. To prevent fire or electrical shock, do not expose the product to heat or moisture.
4. Be sure to read this manual before using stand alone DVMR Model, even before installing HDD.
5. Check electricity at the place you want to install the DVMR unit is stable and meets our
electricity requirements.
Unstable electricity will cause malfunction of the unit or give critical damage to the unit.
6. Several chips on the main board of the DVMR unit and hard disk drive inside the unit generate
heat, and it must be properly discharged.
Do not put any objects just beside exhaust port(fan) on the left side of the unit and do not close
up an opening (fresh air in-take) on the right side of the unit..
7. Put the DVMR unit at well-ventilated place and do not put heat-generating objects on the unit.
When it is installed inside 19 inch mounting rack together with other devices, please check built-
in ventilation fan of the rack is properly running.
8. For questions and technical assistance of this product, contact your local dealer.
2
About this document
Before reading this document