Dynamic CCTV MX-16PRO 설정 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} Dynamic CCTV MX-16PRO에 대한 설정 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamic CCTV MX-16PRO 6 페이지.

Dynamic CCTV

Page 5 of 1

Ltd

DYNAMIC MX DVR PTZ SETUP AND OPERATION GUIDE

This GUI offers basic telemetry control, use the arrow keys to move in the desired location and the + and -

options to zoom in and out where supported. for a more in depth PTZ GUI appear as below:

This PTZ GUI offers more functionality including the ability to activate tours and set positions.

1) CAMERA This displays the camera number that the PTZ interface is currently controlling, to change this

simply click on the channel number and select new input - when this is done your full screen image will change

to the new selected input and PTZ settings that relate to this input will now be used for communication.

2) SPEED This relates the speed in which your telemetry device moves and can be set between 1 and 64,

simply click on the speed number and click on new speed until desired speed is achieved.

3) TOUR Allows you to enable and disable programmed tours simply click on the tour box and select tour

number 1 or 2, when this is done tour will automatically begin in accordance to how it was programmed. To

disable tour click on tour box and set option to Off.

NOTE : When a tour is running it is possible to exit PTZ GUI screen if other functionality is required , the tour

function will continue to run until you reopen PTZ GUI and turn tour option to Off.

4) ARROW CONTROLS For pan and tilt control of your telemetry device, move mouse pointer onto desired

arrow and left click to move your device in the chosen direction.