Hidro-Water ATHENEA 매뉴얼 - 페이지 6

{카테고리_이름} Hidro-Water ATHENEA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hidro-Water ATHENEA 16 페이지.

water should flow, then the pressure reducer inlet will be the way the ar-

row is pointing)

c. Connect the ⅜" tube (Figure-3) to the pressure reducer outlet (Figure

10); to do so, you must remove the blue security clip which is on the out-

let of the pressure reducer and insert the tube fully. Once you have in-

troduced the ⅜" tube, replace the ⅜" plastic clip.

d. You must connect the other end of the ⅜" tube

to the inlet of the Ultrafiltration system (Figure-

1) where it's marked "IN", inserting it fully. Once

inserted, place the ⅜" security clip on it.

e. Screw the faucet adapter (figure 7) to the faucet plac-

ing the supplied O-Ring between the adapter and the

stud. Insert ⅜" tube through this adapter's nut and ⅜"

sleeve then insert a ⅜" plastic insert (Figure-6) in that

end on the tube. Then you must insert that end in the

faucet's adapt-er and tighten the nut with the help of a

wrench (Our reference: OI-0207-128, not supplied

with the system) or a spanner.

You must connect the other end of the ⅜" tube to

the ultrafiltration system outlet "FAUCET" where it's

marked "FAUCET" (Inlet). To do so, you must insert

the ⅜" tube.

ref: MA-UF-0002-EN-V14.0-ATHENEA.pdf