ActivePure A1040I 매뉴얼 - 페이지 9

{카테고리_이름} ActivePure A1040I에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ActivePure A1040I 16 페이지.

GENERAL MAINTENANCE (CONTINUED)

Cleaning the Case

Wipe the unit with a soft cloth dampened (not wet) with water. Do not use chemicals or solvents. Vacuum the Top and Rear

Grills periodically to remove any lint buildup.

Cleaning the ActivePure® Cells

Remove the ActivePure Cells and carefully vacuum accumulated lint. Do not wash the ActivePure Cells. Damage from water

may result.

Filter Assembly Cleaning

When visibly dirty, simply remove the Rear Filter Assembly from the unit (see page 8), and with a hand-held vacuum,

remove the heavy particulate. This method will extend the life of the Filter Assembly.

If the Filter Assembly can't be cleaned by vacuuming, replace the Filter Assembly.

Filter Assembly Replacement

Contact your sales representative or ActivePure Customer Service at 800.572.1446 for replacement filters

for removal and installation instructions).

NOTE: Filter Assembly life will vary based on the operating environment.

Changing the ActivePure Cell

The ActivePure Cell should be replaced when REPLACE ACTIVEPURE CELL appears on the display, or twelve (12) months

when used continuously To change the ActivePure Cell, follow the instructions on page 11.

REMOVING THE FILTER ASSEMBLY

WARNING

Unplug unit

• Unplug the unit before performing any maintenance procedures

• Do not operate the ActivePure Surface & Air Guardian without the Filter Assembly and

Back Cover properly installed

Press the top of

the back cover to

release the back

panel

Lift up to remove

the back panel

Use the included

screwdriver to

unscrew the Filter

Assembly

(see pages 9 – 10

Hand Strap

Lift the Filter

Assembly up

and out to

remove