ADEMCO VISTA-20HWse 사용자 설명서 - 페이지 3
{카테고리_이름} ADEMCO VISTA-20HWse에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO VISTA-20HWse 9 페이지. Vista-20se/vista-20hwse
ADEMCO VISTA-20HWse에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지)
페이지 인쇄
Quick Bypass:
1. Enter security code then press bypass. Example: [7] [2] [9] [6] then press the BYPASS key.
2. In a few moments, all open zones will be displayed along with the word BYPASS. Wait for these zones to be
displayed before arming. Arming the system before zones are displayed eliminates all bypasses.
3. Arm the system as usual when the keypad displays the "Ready" message.
For determining what zones have been previously bypassed. Bypassed zones can be displayed only when the system is
disarmed, and when the "Bypass" message shown in step 3 above is displayed.
Displaying Bypassed Zones:
1. Enter security code then press bypass. Example: [7] [2] [9] [6] then press the BYPASS key.
2. In a few moments, all open zones will be displayed along with the word BYPASS.
Chime Mode
Your system can be set to alert you to the opening of a door or window while it is disarmed by using CHIME mode. When
activated, three beeps will sound at the keypad whenever a protected perimeter door or window is opened. Pressing
the READY key will display the open protection points.
Note that the Chime mode can be activated only when the system is disarmed.
To turn Chime Mode on:
1. Enter security code then press bypass. Example: [7] [2] [9] [6] then press the BYPASS key.
2. The "Chime" message displays while chime mode is on.
To turn Chime Mode off:
1. Enter security code then press bypass. Example: [7] [2] [9] [6] then press the BYPASS key.
2. The "Chime" message disappears from the display.
Panic Alarms
Panic Keys (for Manually Activating Silent and/or Audible Alarms)
To use a paired key panic function, simply press both keys of the assigned pair at the same time. If your keypad has
lettered keys for panic functions, press the designated key and hold down for at least 2 seconds to activate the panic
function.
Types of Panic Alarms
A silent emergency sends an alarm signal to the alarm monitoring company,* but there will be no audible alarms or
visual displays.
An audible emergency sends an emergency message to the alarm monitoring company* and sounds a loud, steady
alarm at your keypad and at any external sounders that may be connected (ALARM plus a zone number is also
displayed).
A personal emergency alarm sends an emergency message to the alarm monitoring company* and sounds at keypads,
but not at external sounders (ALARM plus a zone number is also displayed).