Celestron Feathertouch SCT Microfocuser 설치 지침

{카테고리_이름} Celestron Feathertouch SCT Microfocuser에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron Feathertouch SCT Microfocuser 4 페이지. 11” telescopes

Installation Instructions – Celestron 11" Telescopes

Important:

The telescope optical tube must be positioned horizontally before

removing the original focus assembly. If the telescope is not horizontal the primary

mirror could move during the installation.

Required Tools:

Step 1

Remove Focus Knob

NexStar 11 GPS telescopes have a rubber knob which can be pulled off. Older 11"

telescopes will have a metal focus knob which must be removed using a 1/16" hex-head

wrench to loosen a small set screw. Once the knob is removed you will see the brass

focus shaft as shown below.

Phillips Screwdriver

1/16" Hex-Head Wrench (Not required for NexStar 11 GPS)