Dynamic Engineering IP-CF 사용자 설명서 - 페이지 19
{카테고리_이름} Dynamic Engineering IP-CF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamic Engineering IP-CF 20 페이지. Industrypack-compactflash adapter ip module
페이지 인쇄Specifications
Logic Interface:
CompactFLASH:
Software Interface:
Initialization:
Access Modes:
Access Time:
Interrupt:
DMA:
Onboard Options:
Interface Options:
Dimensions:
Construction:
Temperature Coefficient:
Power:
IP Module Logic Interface
One CompactFLASH compatible socket provided. External transition module
can be used to add a second module.
Control Registers, ID PROM, Vector Register, Status Ports
Hardware Reset forces all registers to 0.
Word I/O Space (see memory map)
Word in ID Space
Vectored interrupt
Access time depends on CompactFLASH Module. back-to-back cycles in 500ns
(8Mhz.) or 125 nS (32 Mhz.) for internal operations. Approximately 1 uS for
CompactFLASH accesses. Write operations are posted and return for pipelined
operation. Read accesses are data delayed.
Masked or polled operation. Master interrupt enable and status. INTRQ0 only.
No Logic Interface DMA Support implemented at this time.
All Options are Software Programmable
50 pin flat cable
50 screw terminal block interface [HDRterm50]
User cable
none required.
Standard Single IP Module. 1.8 x 3.9 x 0.344 (max.) inches
FR4 Multi-Layer Printed Circuit, Through Hole and Surface Mount Components.
Programmable parts are socketed.
0.89 W/ o C for uniform heat across IP
Max. TBD mA @ 5
E m b e d d e d
S o l u t i o n s
P g
1 9
o f
2 0