Celestron StarSense AutoAlign 매뉴얼 - 페이지 4

{카테고리_이름} Celestron StarSense AutoAlign에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron StarSense AutoAlign 15 페이지.

페이지 인쇄

SYSTEM REQUIREMENTS

When setting up StarSense for the first time, a

wide-angle/low power eyepiece and high power

eyepiece are recommended . Start with the

wide-angle/low power eyepiece .

TELESCOPE COMPATIBILITY

COMPATIBLE

NexStar SE Series

CPC, CPC DX

NexStar GT (with Aux . splitter)

CGE Pro

Advanced VX Series

CG-5 Computerized (with Aux . splitter)

CGEM, CGEM DX

CGE

NexStar SLT

LCM (with Aux . splitter)

Mounts with only one port for the hand control, such as the CG-5 Computerized Mount, require an Auxiliary

Port Splitter, item #93919, available from Celestron .

StarSense AutoAlign works with most computerized

Celestron telescopes and several different optical

tubes . Refer to the compatibility charts below .

NOT COMPATIBLE

NexStar i Series

Ultima 2000

Early generation GoTo mounts (such as Compustar)

NexStar GPS

OPTICAL TUBE COMPATIBILITY

The StarSense camera replaces the finderscope on your telescope . Use one of the two included camera

brackets to attach the camera, the large bracket (already installed), or the small bracket . Refer to the chart

below to determine which bracket fits your optical tube .

LARGE BRACKET

SMALL BRACKET

All Celestron Schmidt-Cassegrains

Celestron 6" f/8 .3 Refractor

All Celestron EdgeHDs

NexStar 102SLT Refractor

NexStar 4SE Maksutov-Cassegrain

NexStar 127SLT Maksutov-Cassegrain

NexStar 130SLT Reflector

All Celestron Reflectors and Refractors Packaged with the

Advanced VX Mount

All Celestron Reflectors and Refractors Packaged with the

Advanced CG-5 Mount

All NexStar GT optical tube assemblies

Several other optical tubes from other manufacturers which use

a similar finder dovetail base .

Large Bracket

Small Camera Bracket

(pre-installed on camera in box)