GALA NUI-3/1500 T 설치 및 사용자 지침 매뉴얼 - 페이지 7

{카테고리_이름} GALA NUI-3/1500 T에 대한 설치 및 사용자 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GALA NUI-3/1500 T 12 페이지. Hydromassage column

페이지 인쇄

GENERAL CONSIDERATIONS

- For your column to function correctly, the water

supply pressure must not be higher than 5 bar or

lower than 2 bar. For safety reasons, however, it

must not exceed 55ºC.

limits. If the pressure or temperature of the water is

higher, the column could be damaged. On the

other hand, if the pressure of the water is lower,

your column may not function correctly.

- The thermostatic tap regulates the temperature

by activating the thermostatic cartridge. If the

boiler switches off too often and cold water comes

out when using any of the functions of the column,

clean the filters of the thermostatic taps and, if the

problem persists, reduce the temperature of hot

water coming from the boiler or heater with the

appropriate control on the device. In all cases,

consult the technical characteristics of the boiler.

HYDROMASSAGE

Before a hydromassage: if you have not used a

certain function of your hydromassage for some

time, the anti-limescale injectors should be

checked as indicated in the hydromassage

maintenance instructions.

Pressure of the water jet: Regulate the water flow

for a more or less powerful massage.

Combinations of the type and duration of massage

and the temperature of the water enable you to

adapt the hydromassage to your requirements.

In general, the intensity of the water jet has the

following effects:

-Greater intensity: toning effects

-Less intensity: relaxing effects

The hydromassage should never be excessively

strong.

Temperature of the water: we recommend that

this be between 30 ºC and 39 ºC:

Always respect these

NUI-3 / 1500 T

Hydromassage:

-Cold (30 - 35ºC). With mainly toning effects.

-Neutral (36 - 37ºC). For relaxing effects.

-Hot (37 - 39ºC). For muscular applications.

Thermostatic tap:

temperature by means of the "temperature indicator

control". Turn the on-off control until you reach the

desired water flow rate. The water will be at the

temperature you have selected.

On the "temperature indicator control", there is a

safety button that prevents temperatures over 38ºC

being selected by mistake.

temperature, press the button to unblock this safety

mechanism.

Hydromassage process:

Select the desired function using the function selector,

which permits the following options:

•Spray massage (fixed shower). For general use

•Massage with the hand-shower. For use on any

part of the body.

•Body

massage with the upper adjustable-

direction vertical jets. For application over a wide

area of theupper body.

•Body massage with the lower adjustable-

direction vertical jets. For application over a wide

area of the lower body.

• F o o t - l e v e l w a t e r o u t l e t . To c h e c k t h e

temperature.

Turn the 3-outlet jets, equipped with an anti-limescale

device, in the most appropriate direction, though you

can later change it to direct the water jets onto

whatever parts of the body you want.

Adjust the temperature of the water, checking it at the

foot-level outlet.

Select the appropriate function.

Turn the water on progressively until you obtain the

most appropriate hydromassage pressure.

You can select the desired

If you want a higher