AutoMotionShade 4275F 빠른 참조 매뉴얼 - 페이지 2

{카테고리_이름} AutoMotionShade 4275F에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AutoMotionShade 4275F 2 페이지. Pairing 1st gen remotes with 1st gen rf motors

a) To pair 1-channel or 2-channel remotewith a 4285

1. Press and hold motor pushbutton until it jerks once.

2. Now press Up & Down buttons on the remote together at same time. The motor confirms by jerking twice.

Now pairing is complete. The time gap between above steps should be less than 5 seconds.

b) To pair 16-channel remote with a 4285

1. First on the remote, select the channel you want to pair with this motor.

2. On motor press and hold the pushbutton until motor jerks once, then release the pushbutton.

3. On remote Press the stop button immediately (middle button). The motor confirms by jerking twice.

4. Repeat above procedure for other channels on same remote.

Note 1: To reverse the direction, while the shade moving down or up, press and hold the motor pushbutton

until it jerks.

Note 2: To unpair, or delete the program from motor, press and hold the motor pushbutton until it jerks

twice. (Flash twice on 4275)

Pairing old Remote-transmitter with old RF-Ignition lock Motor, 4275

To pair 16-channel remote with a 4275

1. First on the remote, select the channel you want to pair with this motor.

2. On motor press and hold the pushbutton until motor LED flashes once, and then release the pushbutton.

3. On remote Press the stop button immediately (middle button).

4. Repeat above procedure for other channels on same remote.

411: R-1:09/18

motor:

(F)

motor: (EL-213)

(F)

motor: (EL-213)

(F)

Effective Date: Sep 19, 2018