DBI SALA 5900140 사용자 사용 설명서

{카테고리_이름} DBI SALA 5900140에 대한 사용자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DBI SALA 5900140 8 페이지. Rebar lanyards for work positioning

rebar lanyards for Work PosItIonIng
This manual is intended to meet the Manufacturer's Instructions as recommended by OSHA and
should be used as part of an employee training program.
WarnIng: This product is part of a work positioning system. These instructions must be provided to the user
and the rescuer (see section 8 Termonology). The user must read and understand these instructions before
using this equipment. The user must follow the manufacturer's instructions for each component of the system.
Manufacturer's instructions must be followed for proper use and maintenance of this equipment. Alterations or
misuse of this equipment, or failure to follow instructions, may result in serious injury or death.
IMPortant: If you have questions on the use, care, or suitability of this equipment for your application,
contact DBI‑SALA.
IMPortant: Before using this equipment, record the product identification information from the ID label into
the inspection and maintenance log in section 9.0 of this manual.
Center Connector:
Snap Hook or
Carabiner
Connects to Anchor
Lanyard Legs
Labels
Leg Connector:
Snap Hooks
Connect to
Harness or Belt
Center Connector:
Snap Hook
Connects to Anchor
Leg Connector:
Snap Hooks
Connect to
Harness or Belt
Instructions for the following series products:
User InstrUctIon ManUal
Figure 1 - Rebar Lanyards for Work Positioning
Lanyard Legs
Labels
Rebar Lanyards for Work Positioning
(See back page for specific model numbers.)
© Copyright 2007, DB Industries, Inc.