Hidrotermal HIDRO-PW100 설치 및 유지 관리 매뉴얼 - 페이지 2
{카테고리_이름} Hidrotermal HIDRO-PW100에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hidrotermal HIDRO-PW100 4 페이지. Wall mounted underwater led swimming pool light
Hidrotermal HIDRO-PW100에 대해서도 마찬가지입니다: 설치 및 유지 관리 매뉴얼 (2 페이지)
페이지 인쇄
1. Only a licensed or certificated electrician or a qualified serviceman is allowed to install or
maintain this product.
2. Must be installed in accordance to the requirements of your government standard or local
authorities.
3. Before servicing the light, disconnect the power supply from the circuit breaker. Failure to
do so could result in serious injury, death and or damage to the property.
4. Never handle it with wet hands and feet.
5. This light is design for use only when fully submerged in water.
6. Never operate this light for more than 1 minute unless it is totally submerged in water.
7. All lights are required to be disconnected from the main electricity before any operation of
maintenance.
8. Maximum depth range for the light installation: 1-10 meter.
9. Maximum water temperature range for the light: -20℃-35℃
1. Technical Parameters
Power: 12V / DC
Power:
SMD LED
□10W
□20W
Dimension: Φ295*70mm
WARNING
□12W
□35W
1
High Power LED
□18W
□24W