ADEMCO TeleCommand 사용자 설명서 - 페이지 11

{카테고리_이름} ADEMCO TeleCommand에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO TeleCommand 20 페이지. Telephone module

Example of a Call-In From An Outside Telephone

The following is an example of a complete sequence for a call-in from

an outside telephone using an ADEMCO security system to verify

that the security system had been armed AWAY.

Assume that the 4-digit TeleCommand User Code is 1-2-3-4, and that

the system security code is 1–2–3–4.

An answering machine is not connected in the following example.

1. The caller enters the premises telephone number. After a

programmed number of rings, the caller is prompted to enter your

TeleCommand User Code.

2. The caller enters the TeleCommand User Code: [1] + [2] + [3] + [4].

3. TeleCommand annunciates the current status of the security

system. When the Status is annunciated and the caller hears the

words "DISARMED READY TO ARM," the caller knows that the

system is not armed.

4. To arm the system AWAY, the caller enters the 4-digit system

security code, then presses key [2] AWAY.

5. If arming AWAY was successful, the caller will hear the words:

"ARMED AWAY"

6. The caller may press [#] + [✱] + [✱] to end the call.