CELETTE RAPID SPOT MINI 원본 매뉴얼 - 페이지 9

{카테고리_이름} CELETTE RAPID SPOT MINI에 대한 원본 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CELETTE RAPID SPOT MINI 15 페이지.

3.3 CONTROLS ON GENERATOR FRONT PANEL:

A. Output power adjustment for stud welding

B. Connection indicator

C. Socket for work clamp

D. Socket for torch

E. Control socket for torch

F. Power switch

G. Fuse

H. Input power cable (Confirm the power voltage before use)

NOTE: Protect your eyes and your body when stud welding. Please operate the machine as follow.

1. Keep the work piece free of dirt ,oil, paint and rust.

2. If the base metal is thin, it will dent at pressure. It must add a base plate, when stud welding.

3. Select suitable stud welding torch, according as material, diameter, length of the stud screw.

4. Make sure the diameter of the clamp is correct and the length of the gag lever post is correct.

Install the screw clamp and gag lever post in the torch.

5. Make sure all the cables connect to the machine and workpiece. Connect input cable and turn on.

www.celette.com

Page No: 9