Dynamic Projection MH09 빠른 설치 매뉴얼 - 페이지 5

{카테고리_이름} Dynamic Projection MH09에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamic Projection MH09 10 페이지. Mirror head

Mirror Head Quick Installation Guide

For the full manual please visit

Mounting of the projector

Check if mounting of an adapter plate is required for your model - if unsure check online compatibility list on our website:

https://www.dynamicprojection.com/compatibility/

Caution: Handle the mirror cautiously to avoid any damage to the lens or projector.

Without adapter plate

If spacers are provided, make sure to use them.

Mount the Mirror Head to the projector and

secure all screws - do not fully tighten them.

Adjust the distance between Mirror and Lens

https://www.dynamicprojection.com/mh-support/

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

With adapter plate

Please note that your adapter plate might come with its own manual.

If spacers are provided, make sure to use them.

Mount the adapter plate to the projector, and then

mount the Mirror Head to the projector and secure

all screws - do not fully tighten them.

Adjust the Mirror Head to reach the recommanded

distance of 5-10 mm.

When the clearence is confirmed and the mirror can

move along the tilt axis without touching the lens secure

all screws.

Connect the RS232 and the AC power-cord from

the Mirror Head control unit to the projector.

Please take into account that your projector lens might extend.

QIG - Version 2.8