Automotive Data Solutions TR2410A 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Automotive Data Solutions TR2410A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automotive Data Solutions TR2410A 12 페이지.

1. Unlock and enter vehicle

2. Close doors

3. Insert key into ignition and turn ignition to ON position

4. Press foot brake

For Push-To-Start Vehicles

1. Unlock and enter vehicle with valid smartkey

2. Close doors

3. Press foot brake

NOTE: This feature may not be supported on some vehicles. If available, the programmed 'key takeover' delay

time will be communicated to you by your iDatastart Authorized Dealer at the time of installation.

WHEN SERVICING YOUR VEHICLE

To ensure safety during vehicle servicing, the remote starter must be placed in 'Valet Mode'. The 'Valet Mode'

will disable remote start functionality. To activate or deactivate the 'Valet Mode', follow the instructions below:

With Vehicle Key:

Cycle ignition OFF/ON 2x rapidly, then press brake 3x.

FUNCTION

Valet Mode ON

Valet Mode OFF

With iDatastart Antenna:

Turn ignition ON, then press & hold button for 5 seconds

FUNCTION

Valet Mode ON

Valet Mode OFF

REMOTE START TROUBLESHOOTING

If your iDatastart remote fails to start the vehicle, the parking lights will ﬂash three times immediately, then

# OF PARKING LIGHT FLASHES

TR2410A