Celexon battery screen V2.0 Professional Plus 사용 설명서 - 페이지 10

{카테고리_이름} Celexon battery screen V2.0 Professional Plus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon battery screen V2.0 Professional Plus 12 페이지.

STEP 1: SECURITY CHECK

The screen is approx. 1/3 charged on delivery. Insert the plug into the socket

(ensure correct voltage and plug type). The cable must not be laid on hot

surfaces or stretched. When using an extension lead, make sure it has the

correct specifi cation. Fully charge the screen before using it for the fi rst time

(takes approx. 2.5 hours) and insert the battery into the remote control. Switch

the ON/OFF button on the housing to ON.

STEP 2: EXTEND THE SCREEN (FIG. 2)

Press the „Down" button on the remote

control or on the housing. The screen

extends and stops automatically at

the set end point. Make sure that no

objects

persons

obstruct

the

extension of the screen.

STEP 3: RETRACT THE SCREEN (FIG. 3)

Press the „Up" button on the remote

control or on the housing. The screen

retracts and stops automatically at the

housing or the set upper end point.

Make sure that no objects or persons

obstruct the retraction of the screen.

STEP 4: STOP THE SCREEN

To stop the projection screen manually, press the stop button on the remote

control or on the housing.

It is possible to set the stop points. Please request the instructions for this procedure from

your specialist dealer or directly via www.celexon.com