Celexon DELUXX SlimFrame SoundVision SFSV-332X186 사용자 설명서 - 페이지 5

{카테고리_이름} Celexon DELUXX SlimFrame SoundVision SFSV-332X186에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon DELUXX SlimFrame SoundVision SFSV-332X186 6 페이지. Cinema frame screen slimframe

페이지 인쇄

Assembly of the screen

Step 3

Carefully place the previously secured inner frame with 2 people, centered as well

as possible on the projection fabric.

Start with one corner, using 4 springs, the fabric can be attached using the tension

rods and springs. Use the clamping aid and carefully pull the springs around the

frame and anchor the springs in the rear of the frame profile. The fabric is carefully

drawn around the frame. This must be done with 2 people, one person anchors

the fabric and a second person helps guide the fabric around the frame to avoid

damage/deformation of the fabric. Now repeat the process with the other corners.

When the 4 corners are connected: Start on the long sides in the middle and

anchor further springs working towards the edges. Then do the same (working

from the middle to the edges) on the shorter sides of the frame.

(Before doing this, If you have a six piece frame,screw the two frame reinforcements

to the long frame pieces on the rear of the frame.)

Step 4

Slide the outer (velor) frame pieces onto the screen and connect them with the

corner connectors in all 4 corners. Screw the inner and outer frame together. If you

hear a "click", the frame parts are sufficiently connected.

Caution: Be very careful when

attaching the fabric, do not rub or

scratch it on the frame. Carefully

connect the tension rods.

5 4