Celexon HomeCinema CLR UST 사용 설명서 - 페이지 7

{카테고리_이름} Celexon HomeCinema CLR UST에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon HomeCinema CLR UST 11 페이지. Electric floor high contrast screen
Celexon HomeCinema CLR UST에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

Then pre-drill the holes and insert suitable dowels (suitable material may have

to be procured separately). Fasten the mounting brackets to the wall with

suitable screws. Now lift the screen housing with two people and place it

carefully on the brackets.

Make sure that the screen is standing on the brackets with the rubber pads on

the bracket and slowly lower the case downwards and only let go when the

case is actually held firmly by the brackets.

OPERATION

CONTROL VIA THE HOUSING BUTTONS

Connect the enclosed power cable to the screen and to power. Make sure that

the power supply is correct. Do not lay the cable on hot surfaces and avoid

tension. Switch the power button to ON. A control signal sounds.

Power supply control

0 = Off

I = On

I = Up 0 = Stop II = Down