Celexon INF200 사용 설명서 - 페이지 9

{카테고리_이름} Celexon INF200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon INF200 12 페이지. Inflatable outdoor screen
Celexon INF200에 대해서도 마찬가지입니다: 운영 매뉴얼 (10 페이지)

페이지 인쇄

Attention:

During the inflation process, make sure that the frame does not twist and that

the motorised blower does not tip over. If necessary, support the frame while

setting it up.

STEP 5:

Use the guy accessories (D), to anchor

the screen and stop it from falling over.

Pass the pegs through the loops of the

lower frame and anchor them firmly in

the ground.

Tie the ropes to the the upper loops and

tighten them downwards at an angle of

approx. 60° downwards (Fig. 3).

DISASSEMBLY

Switch off the fan, unzip the frame and guide the screen with two people as

it „collapses". The frame should tilt backwards and the screen surface should

face upwards.

STEP 2:

Disconnect the pump from the power source, loosen the air hose and move the

blower and any extension cord or cable reel into the dry, Loosen all the pegs

from the ground and if necessary, remove the guy ropes from the frame. Place

the sharp pegs safely to one side.

STEP 3:

Hold the frame firmly with one person while the other releases the fabric from

the frame. Pull only on the outer band of the fabric to release it all the way

around.

Fig. 3: Anchoring the screen