ActiVHeat 9VEPPFLBL 사용자 설명서 - 페이지 2

{카테고리_이름} ActiVHeat 9VEPPFLBL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ActiVHeat 9VEPPFLBL 12 페이지. For jacket models

Getting Started

The ActiVHeat

an ON/OFF hibernation slide switch and you should slide this

switch using a pen or small tool to ON now to activate it.

Because it is supplied with a low maintenance charge, you

should charge it fully upon receipt. The first time full charge

may take up to 6 hours. Thereafter it will take approximately 3

hours. This Battery Pack does not require pre-conditioning and

will deliver 100% of power from the first cycle. Always keep the

Battery Pack and Charger out of reach of children.

There are two sockets & a

switch on the Battery

Pack. The smaller socket

(A) connects to the

Charger and the larger

socket (B) connects to the

garment plug.

The switch (D) is a hiber-

nation storage switch and

must be slid using a pen or small tool to the ON position to

charge or operate. You should only slide the switch to OFF

when you don't plan to use the battery pack for more than 2

months.

1. Plug the wall charger into an active electrical outlet.

2. Ensure the battery pack switch is slid to the ON position.

3. Insert the charger plug into the smaller socket on the Battery

Pack.

The Charge indicator light (C) will illuminate RED when charg-

ing. The light will turn GREEN when charging is complete. The

Battery Pack will not charge if the slide switch is OFF.

Note: If no light illuminates on the Battery Pack, check the

Battery Switch is slid to ON, the charger plug is firmly con-

nected into the Battery Pack, and the AC charger is fully in-

Lithium Polymer Battery Pack is supplied with