Celexon Expert Pure White 사용자 설명서 - 페이지 4

{카테고리_이름} Celexon Expert Pure White에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon Expert Pure White 10 페이지. Fixed frame screen
Celexon Expert Pure White에 대해서도 마찬가지입니다: 설치 매뉴얼 (3 페이지), 사용 설명서 (11 페이지)

페이지 인쇄

Lieferumfang

24 x mounting screws (J)

Note: If (A) is split, 8 extra pieces are also included in

delivery and if support strut (L) is required, extras are also

included (2 per strut)

Support strut (L)

Note:

For screens with a picture width up to 200cm, there is no support strut included

For screens with an image width of 250cm 1x support strut is included (except 4:3 format =

2 support struts)

For screens with a picture width from 280cm 3x struts are included

Installation

A. Frame construction

1. CAUTION: This step is only required if (A) is split. Otherwise, please continue to the

next step.

Lay the horizontal frame parts (A) flat on the floor. Put a clean and soft cloth under

the frame parts to prevent scratches to the surface. The two vertically cut sides next

to each other. Insert a connector (H) as shown in the image to a frame part. Make

sure that the holes are lined up. Now screw on the into the connector (H) with two

screws (J). When this is attached, slide the element into the other frame part (A)

and pay attention again that the holes are lined up. Now screw with two screws (J)

firmly. Repeat this step once again with the other components. This step is comple-

ted when you have two completed horizontal frame parts.

8x plastic plugs (K)