Celexon Expert Pure White 사용 설명서 - 페이지 6

{카테고리_이름} Celexon Expert Pure White에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon Expert Pure White 11 페이지. Fixed frame screen
Celexon Expert Pure White에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 설치 매뉴얼 (3 페이지)

페이지 인쇄

INSTALLATION

STEP 1: FRAME ASSEMBLY

ATTENTION: This step is only necessary if (A) is divided. Otherwise, please

continue with the next step.

Place the horizontal frame parts (A) with the flat side on the floor. Place a clean

and soft cloth under the frame parts to avoid scratches on the surface. The two

vertically cut sides should face each other. Place a connecting element (H) in

a frame part according to figure 1. Make sure that the holes are aligned. Now

screw the connecting element (H) in place with two screws (J). Once this is

fastened, push the element into the other frame part (A) and make sure that

the holes are aligned. Now screw the connecting element (H) in place with two

screws (J).

Repeat this step once more with the other components, This step is completed

when you have two assembled horizontal frame parts.

Insert 4 slip threads (G) per horizontal frame part (A) plus the following

slip threads as shown in the illustration.

For screens with a picture width of up to 250cm = 0x (G) per frame part.

For screens with a picture width up to 300cm = 1x (G) per frame part

For screens with a picture width of 350cm = 2x (G) per frame part

For screens with a picture width of 400cm = 3x (G) per frame part

Abb. 1

Fig 2