Celexon DK800 사용자 설명서 - 페이지 7
{카테고리_이름} Celexon DK800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon DK800 10 페이지.
Celexon DK800에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지)
페이지 인쇄
Option 2
1.
Connect the machine to your desired display device (touch-enabled) using the
supplied HDMI cable (image transfer) and a USB 2.0 A-B printer cable (sold
separately - touch transfer).
2.
Connect the power adapter to the mains.
3.
Now press the on / off switch on the visualizer.
4.
If your display does not have automatic source selection, select the signal input
on your display according to your connection method.
5.
The device is now ready for use and can be controlled with touch commands
on the display.
Connecting and using the device with computer
Option 1:
1.
Connect the device to a computer with the included USB cable.
2.
Connect the power cable to the mains.
3.
Now press the on / off switch on the visualiser.
4.
Image transfer can now begin with use of a supporting software on your
computer.
5.
The selection keys on the visualizer can not be used under these settings.
Control is carried out on the software.
6.
With the built-in microphone, the document camera can also be used for video
teleconferencing or alike.
Option 2:
1.
Connect a computer via VGA cable to the document camera using the
VGA input.
2.
Then connect the display device to the document camera via VGA cable using
the VGA output.
3.
Connect the power adapter to the mains.
4.
If the document camera is off, the image of the computer will be displayed by
the display device. As soon as you turn on the document camera, the image
from the camera is displayed on the display. Switching between sources is only
possible by switching the document camera on and off.
Note:
The celexon document camera V800 can be used with any TWAIN enabled PC
software.
Mouse function
You can operate the document camera with a computer mouse connected to
the USB port. In addition, comments can be made on the image by selecting the
„Comment" field.
6