Agrisan Salzburger Master Flaker 소유자 매뉴얼 및 사용자 매뉴얼 - 페이지 9
{카테고리_이름} Agrisan Salzburger Master Flaker에 대한 소유자 매뉴얼 및 사용자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrisan Salzburger Master Flaker 16 페이지. Hand mill
Agrisan Salzburger Master Flaker에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)
페이지 인쇄
Interrupting the milling process
When beginning to mill hard grain types such as corn, rice or durum wheat
at fine settings and with a full funnel the mill can become blocked.
Please re-adjust the setting from fine to coarser until the mill begins to turn
then during the milling process adjust the setting in a clockwise direction
until the desired degree of fineness is reached. When milling hard grain
varieties, if possible do not interrupt the milling process!
Should the funnel become blocked when milling wheat, spelt or
rye shortly turn the funnel in an anti-clockwise direction.
A tip:
the less flour is between the millstones the easier the funnel
can be turned.
Adjusting the degree of fineness
Coarse / fine adjustment is possible by using the knurled nut and is locked by
applying the wing nut.
Coarse Setting:
Loosen the wing nut, adjust the knurled nut in the anti-clockwise direction
until you have the desired setting. Then tighten the wing nut.
Fine Setting:
Loosen the wing nut, adjust the knurled nut (counter in the clockwise
direction) until desired grade is reached. Then tighten the wing nut.
The MH4 grain mill can continually be adjusted and according to the adjust-
ment chosen produces very fine flour respectively grits.
Provided there is no grain between the mill stones and when the mill is not in
Operation, any desired adjustment of the fineness setting can be carried out.
With a full funnel the mill can be adjusted to a coarser setting, however it can
only be set to a finer setting during the milling process.
9