Agrisan Salzburger Master Flaker 사용자 설명서 - 페이지 10
{카테고리_이름} Agrisan Salzburger Master Flaker에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrisan Salzburger Master Flaker 14 페이지. Hand mill
Agrisan Salzburger Master Flaker에 대해서도 마찬가지입니다: 소유자 매뉴얼 및 사용자 매뉴얼 (16 페이지)
페이지 인쇄
Faults and Solutions
Grain kernels or
larger pieces of the
ingredients have
blocked the input
opening
Processed flakes
do not fall from
the funnel onto the
rollers.
The crank is in idle
mode
The rollers are
either oily or very
dirty
If nothing helps:
Before you return the flaker for repair work, please contact your
customer service point, maybe they can give you further helpful tips
on how to solve your problem.
Tel. 0043 6245 83282
E-mail: [email protected]
Give the flaker a small shake or use your fingers to
push the blocked grain kernels into the input
opening.
Hit the outside of funnel with your flat hand. This
slight knock will make the kernels fall at once into
the funnel input without having to use your
fingers to help clear the blockage.
Move the crank handle slightly backwards and
forwards, until you feel a noticeable resistance.
1. Either tighten or loosen the wing nuts
2. Continue to turn the handle by two turns
in the clockwise direction and one turn in
the anti-clockwise direction. Do this until
the rollers are working correctly again.
3. If this does not solve the problem, please
repeat the action described under Point 1.
or please clean the rollers of your flaker.
Please see the instructions und "Care and
Cleaning" Please remove the funnel
10