Activinsights GENEActiv 사용 설명서 지침 - 페이지 9

{카테고리_이름} Activinsights GENEActiv에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Activinsights GENEActiv 20 페이지.

b) Software Overview

Once you have completed the installations, open the software and click the 'Advanced Mode' checkbox

in the bottom right hand corner. You will then see the main dashboard and the menu along the left-hand

side. Connect one or more devices via the cradle.

1. Device Capabilities

This tab displays information about the device(s) connected and existing stored data.

2. Config. Setup

This tab allows the GENEActiv device(s) to be configured and details of the trial and test subject to

be entered on the device.

3. Data Extractor

This is where you will go to extract the data once recording has finished.

4. Data Converter

The Data Converter allows you to convert one or more .bin files into .csv files that can be read by

the GENEActiv viewer and Excel. The convertor can combine the data for up to 5 devices to have

a single time stamp. The combine .bin files function is not recommended for trials of more than a

couple of hours due the data processing time and file size. Data conversions can take up to 15

minutes to complete.

5. Data Analysis

The Data Analysis tab allows you to view .bin and .csv files and zoom in on a particular section.

This subsection can then be saved as a raw data .csv file.

Ensure the

Advanced Mode

box is checked.