Dynamics LWS Bandage 피팅 지침 매뉴얼 - 페이지 8

{카테고리_이름} Dynamics LWS Bandage에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamics LWS Bandage 18 페이지. Lumbar spine support

페이지 인쇄
Dynamics LWS Bandage 피팅 지침 매뉴얼

Important notes

Lumbar spine support
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
product.
Ofa Bamberg wishes you a speedy
recovery!
←
Fitting instructions
The fi tting instructions in pictures can be found
on the fold-over page at the beginning of the
brochure.
1
Before putting on the support, please open the Velcro
fastener and check the position of the pad. Its tip
should be pointing downwards, and can be Velcro
fastened to the desired height on the inside of the
support.
2
The support comes with loops to make it easier to put
on. First lead your left hand through the inner loop
and place the support around your body.
3
Then lead your right hand through the outer loop
and close the Velcro fastener in front of your stom-
ach.
The Dynamics lumbar spine support
stabilises and provides compressive relief to
the lumbar region. A height adjustable pad
massages the muscles with soft nubs. This
stimulates blood circulation and helps to re-
lieve tension in the lumbar spine area.
Please note
– The initial adjustment and strapping on of the
product must be carried out by qualified specialist
staff.
– Wear the product over a thin close-fitting shirt. If it
has to be worn in combination with other products,
then please discuss this in advance with your doctor.
– During long periods of rest (e. g. when sleeping) the
product should be removed.
– If you experience an unpleasant sensation, intense
pain or any other problem when wearing the
product, then remove it and contact your doctor or
specialist supplier.
– We use a comprehensive quality management sys-
tem to check our products. However, should there
still be reasons for complaint, please contact your
specialist supplier.