Dynamics 2 Series 매뉴얼 - 페이지 3

{카테고리_이름} Dynamics 2 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamics 2 Series 10 페이지. Core saw

Safety Information

1. Maintain good footing to avoid slipping or losing control when starting or

operating machine.

2. The appropriate diamond blade and bores should always be used.

Contact dynamics g-ex for this information.

3. Jamming material into the blade is dangerous and should be avoided.

4. When operating this saw, always wear safety goggles or other protective

eye wear.

5. Appropriate hearing protection to be worn whenever operating this

machine.

6. Ensure clothing, jewelry and hair does not become caught in machine.

7. Protective guards should always be in place.

8. Motor operation switch should be turned off before removing or refitting

the diamond blade or making any adustment to vee belt tension.

9. Hands and feet should be kept clear of all moving parts as serious injury

could occur.

10. Always set up and use on a level surface.

11. All wheels must have contact with surface being cut. Do not elevate

front of machine while cutting material or attempt to cut section of

material which is held in the hand.

12. Do not leave unattended while machine is running.

13. Use only impregnated diamond blades not abrasive or woodworking

blades.

14. Do not increase governed no-load engine rpm above 3,500 as this could

result in personal injury or damage to machine or blade.

15. Avoid contact with muffler when engine is hot as serious burns will

result.