8level ALRM-MS-2 매뉴얼

{카테고리_이름} 8level ALRM-MS-2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 8level ALRM-MS-2 2 페이지.

ALRM-MS-1/ALRM-MS-2

Thank you for purchasing our product. Please read this manual carefully before you use it. This manual covers

the ALRM-MS-1 and ALRM-MS-2 products.

NOTE! The manufacturer reserves the right to alter the device parameters and operating methods without a

prior notice. Due to continuous modiﬁcations, some of the functions described in this manual may slightly

differ from reality. The author reserves the right to amend the information contained herein in full or in part

without a prior notice.

Basic information

Wireless passive PIR motion detector, which uses an advanced digital signal analysis including automatic

temperature compensation. The detector can remotely link with an alarm system panel and send signals upon

detecting human body temperature in the sensing range. The device is stable and features a low power

consumption.

Features

• Low power consumption

• Automatic temperature compensation

• EMC interference protection

• Protection against interference caused by a visible bright light.

SPECIFICATION

• The device analyses digital signals sent by two sensors

• Power consumption at standby: ≤30uA

• Power consumption during operation: ≤13mA

• Detection range: 8m

• Detection angle: 110°

• Communication frequency: 433.92MHz

• Range in open space:

- Version with external antenna: ≥450m

- Version with internal antenna: ≥300m

• Supply DC voltage: 6V DC6V(4 x 1.5/AAA battery)

• Operating temperature: -10° ~ 40°

• Recommended installation height: 2 to 2.5m

• Dimensions (L*W*H): 100x56.5x44.5mm

Instrukcja obsługi czujnika ruchu