Autonics ADS-SE2 매뉴얼
{카테고리_이름} Autonics ADS-SE2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonics ADS-SE2 6 페이지. Door side sensor
페이지 인쇄
ADS-SE1/2
Door Side Sensor
Features
● Long sensing distance: 0 to 10m
● High ambient intensity of illumination:
Max. 100,000lx of sunlight
● Easy to connect sensor head to controller
● Easy sensitivity setting
(automatic sensitivity setting by one push method)
● Self-diagnosis function
● Compact Size (W77×L44×H24mm)
: minimized max. 20% than existing product
(based on depth)
Please read "Caution for your safety" in operation
manual before using.
Specifications
Model
Sensing type
Sensing distance
Power supply
Power consumption/Current
※ 1
Control output
Response time
Output holding time
Available sensor set
Indicator
Light source
Vibration
Shock
Ambient illumination Sunlight: Max. 100,000lx (Receiver illumination)
Environ-
Ambient temperature -20 to 55℃, storage: -25 to 60℃
ment
Ambient humidity
Protection structure
Sensor cable length
Sensor cable
Material
Accessory
Approval
※ 2
Weight
※ 1: Do not use Load which is beyond the rated capacity of contact point of Relay.
It can cause bad insulation, contact fusion, bad contact, relay breakdown, and fire etc.
※2 : The weight includes packaging. The weight in parentheses is for unit only.
※ Please purchase 1 set of sensor separately when mounting 2 sets of sensor.
※ The mounting bracket of sensor (ADS-SB12, ADS-SB10) is sold separately.
※ It is enable to purchase a controller (ADS-SEC1/2) separately.
※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
C-16
ADS-SE1 (1-channel)
Through-beam type
0 to 10m
12-24VAC ±10% 50/60Hz / 12-24VDC ±10% (Ripple P-P: Max. 10% )
AC: Max. 2VA, DC: Max. 50mA
Contact capacity: 50VDC 0.3A (resistive load)
Contact composition: 1c
Relay life cycle: Mechanical- Min. 5,000,000 operations, Electrical- Min. 100,000 operations
Approx. 50ms (from light OFF)
Approx. 500ms (from light ON)
1 channel
OUT1 indicator: red, OUT2 indicator: green (Refer to C-20 for the display status in operation)
Infrared LED (850nm modulated)
1.5mm amplitude at frequency of 10 to 55Hz (for 1min.) in each X, Y, Z direction for 2 hours
2
500m/s
(approx. 50G) in each X, Y, Z direction for 3 times
35 to 85% RH, storage: 35 to 85% RH
IP30 (IEC standard)
5m
Ø2.4mm, 1-wire, length: 5m (AWG26, core diameter: 0.16mm, number of cores: 7, insulator out diameter: Ø1.32mm)
Case: ABS, Lens: PMMA
Sensor 1set (ADS-SHP), Fixing bolt (M4×20) for controller: 2EA
Approx. 450g (approx. 300g)
ADS-SE2 (2-channel)
2 channels