Hifionics HFI 200 A 사용자 설명서 - 페이지 9

{카테고리_이름} Hifionics HFI 200 A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifionics HFI 200 A 13 페이지. Industria series active bassreflex subwoofer system

Electrical Connections

BATT +12V

Connect this terminal with the 12VDC pole of the battery, by using an appropriate power supply wire with a profile of

10 - 20 qmm. Please also install a additional in-line fuse (20 - 40 A) very close to the battery in the power supply wire.

GND

Connect this terminal with the vehicle's chassis. The ground connection should be as short as possible and should be

mounted at a blank metallic point on the chassis. Ensure a stable and safe connection to the Minus-terminal of the

battery. The ground wire should have the same profile than the +12V power supply wire.

REM

Connect the remote turn on/off wire of your headunit with the REM-

terminal of the soundsystem. This ensures that your Soundsystem

turns on and off with your headunit. If your headunit is not equipped

with a remote wire, you can also use the power on/off wire of a

electrical antenna.

IMPORTANT: Please ensure for all connections the correct polarity.

Faulty and interchanged polarity may cause malfunctions and damage.

FUSE

The integrated fuse protect your

Soundsytem from shorts and overheating.

If this fuse is damaged, replace the fuse

only with a appropriate fuse with the same

rating and construction.

ENGLISH - 9