Hifionics HFI 250 A 사용자 설명서 - 페이지 10

{카테고리_이름} Hifionics HFI 250 A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifionics HFI 250 A 13 페이지. Industria series active bassreflex subwoofer system

페이지 인쇄

1. Technische Daten

Connections & Features

RCA LEVEL INPUT

This Level Input is

designed for the RCA-

wires of your headunit or

any other devices with a

linear RCA output. If your

headunit is equipped with

a RCA Subwoofer Out-

put, it is recommended to

use this output.

PHASE - Switch

This switch changes the

phasing mode from

"0˚" to "180˚". Depending

on the location of the

Soundsystem, a phase

shift could improve the

Soundquality.

HIGH LEVEL INPUT

The High Level Inputs are designed for using already pre-amplified and non-linear input signals, e.g. like loudspeaker

wires, which are connected directly with your headunit. Split up a line signal wire of a already installed rear loudspeaker

and connect the split-up signal with the High Level Inputs.

WARNING: Never use the HIGH LEVEL INPUTS and RCA LEVEL INPUTS at the same time. This may get damage

the Soundsystem permanently.

IMPORTANT: Please ensure for all connections the correct polarity.

Faulty and interchanged polarity may cause malfunctions and damage.

10 - ENGLISH

POWER - LED

Indicates the operation mode

by lighting up in red.

LOW PASS -

Controller

This controller adjusts the cut-off for the

low pass crossover. Thus the higher

frequencies will be eliminated from the

sound signal. Adjustable level is between

40Hz and 200Hz.

BASS BOOST -

Controller

This controller adjusts the

bass boost level from

0 - 18 dB. Please use this

controller with care!

LEVEL - Controller

This controller adjusts

the output level of the

Soundsystem from MIN

to MAX.