celios G200 사용자 설명서 - 페이지 11
{카테고리_이름} celios G200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. celios G200 19 페이지. Advanced air purifier
celios G200에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지)
Charge the batteries
1.
2.
20
After turning on the G200 Core, the battery life
indicator
on the control panel shows that the
batteries are charging. When the batteries are fully
charged or when there are no batteries in the G200
Core, the battery life indicator light will turn off.
You can also charge the batteries outside of the
Main Stand by plugging the Power Adapter directly
into the G200 Core.
Note: The G200 can operate:
•
On one or both of its batteries
•
Without batteries and power provided by the
Power Adapter
Charging the batteries the first time
Properly charging the batteries will allow maximum runtime and battery life. The
following procedure should be followed on the first charge of any new batteries.
1. After inserting batteries, connect the Core with the supplied power adapter. The
Core can be docked in the Main Stand or plugged in directly.
2. Allow the batteries to charge until full
setting while charging.
3. Turn the unit on to Speed 1 and remove the power adapter plug.
4. Allow the unit to fully discharge and power off. This operation can take up to 30
hours.
5. Fully charge the unit again per Steps 1 and 2 above. The batteries are now
properly charged for maximum performance.
This procedure can be repeated if the battery life is lower than expected. If this procedure fails to
increase battery life, contact Customer Care at 1-833-CELIOS1 or [email protected].
. You may run the G200 on any
21