8STREME 5310 매뉴얼 - 페이지 6

{카테고리_이름} 8STREME 5310에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 8STREME 5310 16 페이지.

4.6 For optimal performance, place your robot in

the pool at the furthest possible location from

the power source.

This is the appropriate length of the cable so

that the robot can reach all of your pool.

Limit the length of cable in the pool to the

bare minimum, and place the surplus outside

the pool.

4.8 To turn off your robot, press the power button

4.9 Do not remove your robot out of water

immediately after the end of its cleaning cycle

so as not to cause a temperature shock.

4.10 When the cleaner is no longer used for an

extended period, store your

robot indoors.

* If red or blue lights blink, check the

troubleshooting section

Page 6

4.4 Screw the nut of the floating cable firmly.

4.3 Insert the end of the floating cable into the

socket. Take note of the orientation of the

plug and socket.

4.5 Press the switch on the housing of the

transformer under blue light. This will activate

the power source.