Dynamite DYN4058 사용자 설명서

{카테고리_이름} Dynamite DYN4058에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamite DYN4058 4 페이지. Li-po charger

Thank you for purchasing the Dynamite

DC-powered charger meant only for 2–4 cell lithium-polymer

(Li-Po) battery packs and features a microchip CPU controller

with a large LED to display the charge status. It also precisely

follows standard Li-Po charger algorithms. This programmed

set of charging rules tells the charger to increase the voltage of

the Li-Po cell to 4.2V (per cell). While the voltage is rising, the

current is precisely kept at one of the preset rates (either 500mA,

1A or 2A). Once the maximum cell voltage is reached (at which

point the battery is 80–90% charged), the charger steadily

maintains a constant voltage, while the current decreases until

terminating the charge.

Li-Po Charger. It' s a

Features

• Microprocessor controlled technology provides efficient

and precise charging

• Uses a voltage booster to allow charging up to 4-cell

(14.8V) Li-Po batteries

• Selectable charge rate of 500mA, 1000mA and 2000mA

• Automatically detects cell count and indicates error

• LED and audible beeper indicates charging status

• Short circuit protection for both input and output

Specifications

• 12V DC-powered

• Charges 2–4 cell Li-Po packs

• Reverse polarity protection circuit