Hifionics ZEUS ZRX65CX 사용자 설명서 - 페이지 3

{카테고리_이름} Hifionics ZEUS ZRX65CX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifionics ZEUS ZRX65CX 10 페이지.

SPEAKER LOCATION AND MOUNTING TIPS

THE FIRST STEP IS THOROUGH PLANNING BEFORE THE

INSTALLATION BEGINS.

THE SPEAKER SCREW HOLE CONFIGURATION WILL WORK WITH

MOST DOMESTIC AND FOREIGN VEHICLES.

FOLLOW THESE INSTRUCTIONS CAREFULLY TO ENSURE PROPER

IMAGING AND MAXXIMUM PERFORMANCE.

Factory Speaker Replacement Location and Installation

1. Before you alter the vehicles interior materials, be sure there is

adequate room and clearance for the speaker depth to clear the

windows and other moving parts. (See speaker measurement page).

2. If you are using the speaker wires provided in this kit, be sure

to route wires through the factory door grommet as shown in the

speaker mounting diagram.

3. After securing the speaker and checking clearances, connect

the red/black speaker audio wires to the correct speaker + and -

spade terminals.

Custom Speaker Location and Installation

1. Follow steps 1-3 above.

2. Use the speaker mounting diagrams and speaker hole cut-out

dimensions on the following pages.

3. Always mount the left and right side speakers on the same plane.

This means that each speaker should be the same height from

the floor and same distance from the firewall. Do not mount one

speaker higher, lower, further forward or further behind the other.