DBK Drymatic Boost Bar FGPH106 사용 설명서 - 페이지 8

{카테고리_이름} DBK Drymatic Boost Bar FGPH106에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DBK Drymatic Boost Bar FGPH106 18 페이지. Adaptable heat drying system

2.2 Optional - Connect Drymatic Boost Bar Adaptors

Drymatic Boost Bar has been designed to work with a series of adaptors that allow you to target the heated airflow in to

areas that may otherwise be difficult to access such as Crawlspaces, Ceiling Voids, Cavity Walls and Tented Areas.

The Boost Bar is supported by the following adaptors:



4-Port Adaptor (4 x 100mm Connections)

This gives you the ability to split the heated airflow in to four separate channels. You can now heat four separate

areas at the same time. The connector accepts both PVC hoses and Lay Flat Ducting



12-Port Adaptor (12 x 38mm Connections)

This gives you the ability to split the heated airflow in to 12 separate channels. You can now use these outlets to

heat up difficult to reach locations such as wall cavities, ceiling voids, kitchen cabinetry and subfloor areas.



90Deg Adaptor

This gives you the ability to angle the airflow downwards in to a crawlspace or subfloor area. Alternatively the

connect or can be rotated and the airflow can be angled upwards in to the ambient air, keeping the warm dry air

away from sensitive floorings materials etc.

Lay Flat Ducting can be attached to the outlet of this adaptor to take heated airflow up to ceiling level if required.

See overleaf for fitting instructions.