Galanz P180M30ASL-YL 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Galanz P180M30ASL-YL에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galanz P180M30ASL-YL 20 페이지.
페이지 인쇄
1) If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of
the extension cord shall be equal to or greater than the electrical rating of the appliance, or 2) Do not use
an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install
an outlet near the appliance.
Electrical Requirements
The electrical requirements are a 120 volt 60 Hz, AC only, 20 amp. It is recommended that a separate
circuit serving only the oven be provided. The oven is equipped with a 3-prong grounding plug. It must be
plugged into a wall receptacle that is properly installed and grounded.
Power Supply Cord
1.A short power supply cord is provided to reduce the risks resulting from becoming entangled in or
tripping over a longer cord.
2.Longer cord sets or extension cords are available and may be used if care is exercised in their use.
3.If long cord or extension cord is used：
a) The marked electrical rating of the cord set or extension cord should be at least as great as the
electrical rating of the appliance.
b) The extension cord must be a grounding-type 3-wire cord, and The longer cord should be
arranged so that it will not drape over the counter top or table top where it can be pulled on by
children or tripped over unintentionally.
Notes:
If you have any questions about the grounding or electrical instructions, consult a qualified electrician or
service person.
Neither the manufacturer nor the dealer can accept any liability for damage to the oven or personal injury
resulting from failure to observe the electrical connection procedures.
标记
处数 更改单号
设 计
标准化
陈 琴
校 对
审 定
审 核
王少云
工 艺
日 期 2013-01-12
SEE30FYLH-SABC0U
(P180M30ASL-YL)
签 字
日期
图 样 标 记
谭银珠
王守国
S
A
共 19 页
说明书
数量
重量 比例
1:1
第 7 页
JS1M0609- 19845-004
广东格兰仕微波炉电器制造有限公司